Connect with us


Mechanical & Thermal Processes

Support for gas suppliers with adapted processes

Published

on


Mechanical & Thermal Processes, News, Quality Management

The Schleupen.CS platform facilitates the conversion for gas suppliers with many, largely automated processes in the course of the market area merger on 01.10.2021. The adaptation of the processes and formats is very far-reaching and affects both network operators and suppliers. On the other hand, the deadlines for implementation are tight. Schleupen AG accompanies the merger and will provide all necessary formats and processes at the given time, so that the gas suppliers in the Schleupen customer group can start in the new, uniform market area well prepared.

The merger of the market areas means a profound change for gas suppliers, regardless of whether they are suppliers or network operators. For there is not only a new market area and a new market area manager, but also new balancing groups. The changes therefore reach deep into contract billing, market communication and energy balancing. Schleupen.CS gives the responsible parties the opportunity to enter the new market area manager and the new balancing groups in due time. Afterwards, the process for changing the master data is automatically generated for the supplier. At the network operator, the change of master data is processed automatically.

Also by means of an automated process, the non-converted contract partners are determined at the network operator and the further processes are started. This means that Schleupen.CS users will be ready for the new, uniform market area in Germany by 01.10.2021, on time and with relatively little effort, and can benefit from the advantages of the merger. The fact that overlaps between the market areas will be eliminated and participants will only have to be registered with one balancing group will also result in procedural simplifications. In addition, the trading centre will be decisively strengthened by the merger.

 

“It was important to us to make the changeover as simple as possible for the supply companies. In doing so, we were able to benefit from the modern architecture, which makes our platform very flexible.”

– Dr Volker Kruschinski, CEO

 

In the long run, only platforms that are flexible enough due to their architecture will be able to keep up with the high speed of change in regulation and provide the corresponding, new procedural steps and formats on time. The fact that the conversions for the market area merger gas could be implemented quickly and on time proves that the Schleupen.CS platform is on the right track.

Biotechnology Mechanical & Thermal Processes Pharmaceuticals Plant Construction, Engineering & Components Videos

Lauda Integral – Future Integrated
Future Integrated

Published

on

Lauda Integral – Future Integrated
Experience the new generation of Lauda Integral process thermostats. Technically newly developed and equipped with an intuitive operating and interface concept, Integral process thermostats reliably meet the most demanding temperature control tasks in the chemical, pharmaceutical, biotechnology and automotive industries.
Continue Reading

Biotechnology Mechanical & Thermal Processes Plant Construction, Engineering & Components Videos

Thermostats
Laboratory Circulators

Published

on

JULABO DYNEO Laboratory Circulators
With the Dyneo series, Julabo offers powerful thermostats that reliably meet the highest demands in terms of functionality and reliability. The Dyneo thermostats were developed with pioneering technologies for modern laboratories and are manufactured in Germany to the highest quality standards.
Continue Reading

Measurement, Instrumentation, Control & Automation Mechanical & Thermal Processes

New gas coolers eliminate thermal problems

Published

on

The removal of moisture is an essential step in extractive sample gas conditioning systems. However, this process generates excessive heat inside the cabinets and thus very often requires additional efforts like air conditioning. The new gas cooler series TC- kit (+) from Bühler Technologies eliminates these extra efforts. Peltier elements as temperature transmitter are the middle part of a sandwich consisting of a heat sink with integrated fan forming the outer part and a cooling block with exchangeable heat exchangers and the attached electrical terminals as the inner part. For the installation a cut out has to be made at the appropriate side wall of the cabinet. With the heat sink geometrically larger as the internal parts, the unit slides into the cut out and finally is attached to the outside wall of the cabinet and sealed by a gasket. The electrical leads and the sample gas lines are kept inside the cabinet whereas the thermal load is dissipating to the ambient keeping the inside of the cabinet considerably cooler. The protection class of the mounted unit is IP 54. The TC Kit (+) requires 24VDC as power supply. As an option an extension unit for 115/ 230V AC supply is available and will be saddled directly to the basic unit. This extension also provides all neccessary connections to auxilliary units like sample gas and condensate pumps as well as moisture detectors and heated sample lines. The operation parameters and alarm settings are programmable by a remote controller with digital display. This controller can be installed at an appropriate place inside the conditioning cabinet. The TC Kit+ version comprises special heat exchangers with minimised wash out effect as required by EN 15267-4 suitable for automated emission monitoring (AMS) systems.
Continue Reading