Connect with us


Chemicals

ISCC PLUS certification

Published

on


Chemicals

Asahi Kasei Plastics Singapore Pte Ltd (APS), a wholly owned subsidiary of Asahi Kasei, a diversified Japanese multinational company, acquired the widely recognized international certification ISCC PLUS1 for its polyphenylene ether (PPE) as a sustainable product on September 19, 2022. Production of PPE using biomass-derived raw material is scheduled to begin in January 2023.PPE is an engineering plastic that is blended with other resins such as polystyrene and polyamide to form modified PPE (m-PPE). Asahi Kasei’s XYRON m-PPE is widely used in automotive parts, consumer electronics, and industrial products.

XYRON features several excellent characteristics which are expected to drive further demand growth especially in the field of the environment and energy. For example, leveraging its excellent electrical insulation and other electrical characteristics, XYRON is used in parts for photovoltaic power generation systems which operate at high voltage. These excellent properties also allow products to be made smaller, which contributes to resource conservation. XYRON is also used in components of batteries for electric vehicles (EVs), which are rapidly becoming widespread. Its low specific gravity and flame-retardancy allow batteries to be made lighter, which contributes to increased range and lower CO2 emissions.

As awareness for the global environment and the importance of sustainability increase, Asahi Kasei has worked to further raise the environmental contribution of XYRON m-PPE by using recycled raw material and biomass raw material.

Under these circumstances, Asahi Kasei and APS sought to reduce CO2 emissions across the supply chain for XYRON m-PPE, and in September 2022, APS became the first PPE manufacturer in Asia2to acquire ISCC PLUS certification. The certification enables APS to produce and sell PPE using sustainable raw material assigned by the mass-balance method3. The production start is planned for January 2023.

In order to contribute to carbon neutrality, Asahi Kasei is developing recycled grades of XYRON m-PPE which are made using recycled material and working together with customers to establish a recycling scheme. PPE is a material suitable for recycling as its chemical structure has excellent hydrolysis resistance, which suppresses the deterioration of physical properties. Asahi Kasei also developed and patented technology to extend the service life of XYRON m-PPE, which further suppresses the deterioration of physical properties due to recycling.

The Asahi Kasei Group aims to be a global sustainable partner for its customers by contributing to the reduction of waste and CO2 emissions through the assignment of biomass in the PPE of its XYRON m-PPE by the mass-balance method, the development of products utilizing recycled material, and the establishment of a recycling scheme together with its customers.

Chemicals

A ground-breaking approach to keep plastics circular

Published

on

Fully in line with its award-winning No Waste vision, Coveris is now introducing a new business segment named ‘ReCover’, bundling all efforts in waste sourcing, processing, and recycling to close the loop for circular plastic recycling. ReCover will act as a separate company supplying Coveris sites on an arm’s length basis but also supplying third party customers that are interested in recyclates on a quality level that are not available in the market today.

As part of its sustainability strategy, Coveris has already announced the ambition of reducing waste in all its forms. Expanding its recycling capacity and capabilities is just the next logical step for avoiding pollution and supporting customers in their sustainability efforts.

“With ReCover, we have launched a game-changing process – unique within the entire industry. With several high-impact projects in the pipeline, we are aiming at establishing a stand-alone Business Unit in the next couple of years, entirely dedicated to circular economy and closing the loop. ReCover is a platform for all mechanical recycling activities but also leads our developments to achieve food contact compliant materials.” comments Jakob A. Mosser, CEO Coveris.

To further strengthen and expand its recycling capabilities Coveris has recently acquired the site and assets from Capital Valley Plastics Blaenavon in Wales, UK. CVP is a well-established PE recycler, processing post-consumer and post-industrial waste via in-house mechanical recycling extruded mostly into building films. The Blaenavon site is equipped with the latest state-of-the-art mechanical recycling technology, with an annual capacity of 20 000 tons.

“The newly acquired Blaenavon site and assets will serve as an important recycling hub for Coveris’ Films and Flexibles operations, closing the loop for customers and for our own film production across the network. This new recycling acquisition marks a perfect start for our new company ReCover and our quest to continuously enhance our recycling offers to our customers, truly closing the loop and bringing us closer to our vision of No Waste.”, closes Mosser.

Continue Reading

Chemicals

Energy management system for green hydrogen

Published

on

ABB introduces its energy management system ABB Ability OPTIMAX to the green hydrogen market, to help reduce costs of production by enabling real-time visibility of energy consumption across operations.

Green hydrogen made via electrolysis – a process of using electricity from renewable sources to split water into hydrogen and oxygen – is widely considered an important energy vector for achieving a low carbon future. It does, however, pose significant challenges in the way of high production costs and energy intensive processes.

According to the Green Hydrogen Catapult, a global initiative made up of leading energy companies, to scale up production capacity to the 50 times needed, the cost to produce green hydrogen needs to drop by 50 percent to less than $2/kg by 2026.

ABB’s OPTIMAX supports this by serving every aspect of a hydrogen plant lifecycle, from simulation at design and engineering phases to real-time visualization and monitoring when in operation. The software measures bi-directional power flows and carbon dioxide emissions providing contextual data which operators can use to determine optimal energy consumption levels required to support plant processes and minimize waste.

The transparency offered by the solution can also be applied to increase the efficiency and safety of each electrolyzer module being operated within the plant, regulating each module’s speed, and ensuring it is only used as and when required.

“Scaling up green hydrogen production requires significant capital investment as well as high operating costs,” said Sleman Saliba, Global Product Manager Energy Management for ABB Process Automation. “Nearly 70 percent of the total operating costs to run a hydrogen plant comes from the electricity needed to split the water molecule in the electrolysis process. With OPTIMAX, for between 1-3 percent technology investment, operators can run their industrial processes in the most energy efficient way and gain up to 20 percent reduction in electricity-based costs.”

Incorporating intra-day planning, operators can also utilize OPTIMAX to plan ahead to trade competitively with the grid, developing a circular energy system that is based on forecasts of renewable energy availability against demand, also considering market electricity prices.​

The solution can also be used to optimize green hydrogen integration with existing hydrogen networks and any future infrastructure that may developed.

Continue Reading

Chemicals

Innovation Hub for Co-Creation of end-to-end

Published

on

As part of continuous investment, GCR Group has announced the recent opening of a dedicated R&D center in La Bisbal del Penedés, Tarragona, Spain. This ‘Innovation Hub’ is intended to build on 20 years of experience in materials technology and develop short-term and long-term polymer-based solutions that minimise environmental impact. The overall company investment is expected to reach Euros 100 million by 2025. Combined with the new state-of-the-art 200,000 tonnes recycling plant opening in 2023, these investments reflect a long-term vision created when the company was founded in 2001; ’Innovating our Sustainable Tomorrow.’

While materials based on virgin polymer resins have well-defined and consistent properties, working with recycled materials or finding ways to reduce carbon footprint presents new challenges that require experimentation to solve. Often custom solutions need to be created considering the waste stream and the application. This is why GCR believes collaborative partnerships in ‘co-creation’ projects within the value chain are vital. The new 2000 square meter Innovation Hub concentrates the technical expertise of GCR’s talented team. It includes all the equipment necessary for incubation and proof of concept from development to pilot plant and final production.

Existing collaborations involve technical institutions, equipment suppliers, raw material and waste-stream suppliers, plastic converters and brand owners. GCR also offers turn-key project management where customers completely trust GCR’s capabilities. “We prefer to send you all our scrap because the quality you’re getting out of it is something we will never reach,” quoted a major converter.

GCR’s extensive materials know-how and relentless attention to quality are reflected in existing product ranges. CICLIC R-polyolefins (Recycled polyolefins) are based on ‘up-cycling’ fully traceable waste streams and can deliver similar and consistent material properties as virgin plastics with 60-80 percent lower Carbon Footprint certification.

GRANIC mineral-filled masterbatches and compounds can offer up to a 30 percent reduction in energy costs in downstream polymer processing. In addition to an extensive range of existing products, the Innovation Hub combines GCR’s comprehensive technical and processing expertise to customise products and bring solutions to the challenges encountered when using post-consumer or post-industrial waste or carbon footprint/LCA improvement. GCR can enhance the value of waste streams through, for example, compatibilizers or capturing/blocking odour-producing bacteria. In addition, it has developed bio-polymer-based and biodegradable solutions.

“We firmly believe that we have the capability, agility and vision to accelerate the circular economy,” says Santiago Sans, Innovation Director at GCR. “Through this investment, we demonstrate our belief in collaboration with like-minded partners in the value chain.”

Finding new sustainable solutions will require changes in how the plastics industry traditionally works; a combination of know-how, new ways of thinking, and a long-term vision. GCR’s investments in Innovation Hub and the new recycling plant bring new tools to help facilitate these changes. This is another example of GCR’s long-term commitment to the circular economy.

Continue Reading