Gain for technical managers in wastewater treatment plants

On Octo­ber 20, 2021, Atlas Cop­co will launch its fall sem­i­nar series with a spe­cial for tech­ni­cal man­agers in waste­water treat­ment plants. In addi­tion to the tech­ni­cal lec­ture, the 30-minute event also offers the oppor­tu­ni­ty for a live chat with the speak­er. Fur­ther dates are already being planned.

The sem­i­nar is aimed at all those who are respon­si­ble for bio­log­i­cal waste­water treat­ment in waste­water treat­ment plants and are inter­est­ed in opti­miza­tion poten­tials in acti­va­tion, e.g. through the use of ener­gy-effi­cient low-pres­sure blow­ers. The sem­i­nar will focus on expla­na­tions of the munic­i­pal guide­lines, infor­ma­tion on fund­ing oppor­tu­ni­ties and how to apply for them. The tech­ni­cal­ly ori­ent­ed part will cov­er, among oth­er things, the dif­fer­ences between V‑belt and gear ratios, infor­ma­tion on usable vol­ume flow accord­ing to ISO 1217 and ISO 1343, and exam­ples of ener­gy-sav­ing poten­tial. The detailed agen­da can be found on the Atlas Cop­co web­site under Com­pressed Air Knowledge.

“In my sem­i­nar, you can expect top­ics that I have spe­cial­ly adapt­ed and designed for com­pressed air users in water treat­ment plants: — What does the ener­gy opti­miza­tion of a com­pressed air sys­tem look like, What motor effi­cien­cy class­es are there and what are the dif­fer­ences, Tech­nol­o­gy com­par­i­son: gear vs. V‑belt ratio, , Rotary pis­ton vs. screw ele­ment — always com­pare “apples with apples”, Deliv­ery quan­ti­ties of blow­ers and ref­er­ence con­di­tions, Total pow­er con­sump­tion as an indi­ca­tor of actu­al con­sump­tion, A sav­ings poten­tial sam­ple cal­cu­la­tion, Com­ments and expla­na­tions on the munic­i­pal direc­tive, Some prac­ti­cal exam­ples. After my pre­sen­ta­tion, you are wel­come to chat for ques­tions and comments.”

- Atlas Copco

Atlas Cop­co’s online sem­i­nars are designed by prac­ti­tion­ers for prac­ti­tion­ers and are of par­tic­u­lar inter­est to those respon­si­ble for com­pressed air and gas sup­ply sys­tems in indus­tri­al plants, as well as engi­neer­ing and plan­ning offices that have to deal with these projects. The top­ics of the sem­i­nars offered range from an intro­duc­tion to the basic knowl­edge required for com­pressed air gen­er­a­tion, to the phys­i­cal prin­ci­ples, the var­i­ous tech­nolo­gies and their fields of appli­ca­tion, to prac­tice-ori­ent­ed pro­pos­als for solu­tions. Par­tic­i­pa­tion is free of charge. In order to be able to guar­an­tee an opti­mal and as inter­ac­tive as pos­si­ble course of the webi­nar, the max­i­mum num­ber of par­tic­i­pants is limited.